Pages

Search

Wednesday, July 6, 2011

Marushin M1 Garand

   
The beast of American small arms options used by the General Infantry of the US Armed Forces in World War II, the M1 Garand is a weapon that has become an icon of American Military power during that period in history.

This model utilizes a cycling bolt system that allows this weapon its semi-auto shooting. Using 6mm pellets it is also very representative of the powerful rifles of real steel and it even matches the real steels capacity of 8 BBs.

The cool factor of this replica does not stop there, oh no. Although it does not use shells, the weapon does put its 8 BBs inside a faux''en blo'' clip which sits inside an internal magazine. The clip is loaded with 8 BBs much like a small magazine and then the whole ''clip'' is pushed into the receiver from the top such that the whole assembly goes into the internal magazine.

Firing off the shots is quick and nasty, the semi-auto action delivering high accuracy out of the long barrel. On its native HFC134a / Duster gas it will clock about 160 FPS with a 0.2g BB and will only just cycle with the lower pressure gas; although not built for TOP / Green / Propane gas, using the higher pressure source will crank things up to about 300 FPS with the 6mm pellets. Overall, this means that this 6mm version is far kinder to your targets even at short range as suppose to the big grunting 8mm versions cannon like power.

Although messy to operate and load the complex mechanism, users cannot really complain because it reflects the limitations of the real steel. Clips cannot be topped up while in use and when it becomes empty the last shot launches the clip out flying automatically which can alert enemies to your empty weapon.

With extensive use of high quality metal and a nice dark rich real wood body this weapon is a collectors piece, a reenactors tool and a period themed Airsoft skirmishers battle rifle.

Over the years, Marushin has made different models of M1 Garand; a limited edition Walnut stock version, a urethane plastic body version, a vintage version and this basic version. The basic version uses real wood of an unspecified nature so while it is not as luxurious as the Walnut version it probably looks more like the "tool grade" real thing than the "collector" style Walnut version. This 6mm version is the basic type but the downgrade to 6mm ammo affords lower power for short range and the more conventional ammo is easier to source.

Monday, July 4, 2011

Well M187A Sniper Rifle

Description:
The Well M187A is a great copy of a very successful Maruzen sniper rifle. It looks like a cross between a sniper rifle and an assault rifle.

The M187A features a 5 position retractable LE stock, and M4 pistol grip. With the retractable butt stock and the entire gun being made almost completely of plastic, the M187A is an extremely compact and lightweight sniper.

The M187A comes ready for accessories with the picatinny weaver top rail above the bolt and on the bottom front of the stock is a bipod perch. This is an excellent sniper rifle for those looking for something different than the run of the mill MK96 and M700 replicas.

Specifications:
Manufacturer: Well
Muzzle Velocity: 420FPS
Magazine Capacity: 27 rounds
Package Includes: Gun, magazine, speed loader, manual

SOCOM Gear Full Metal 1911 Viking Tactics

Description:
The SOCOM Gear Full Metal 1911 Viking Tactics Airsoft Gun is an amazing GBB that features full licensing from Viking Tactics. Viking Tactics is one of the largest tactical firearms instruction, consulting and sales companies around and are quickly becoming more and more popular in the firearm industry.

The SOCOM Gear Full Metal 1911 Viking Tactics is constructed mainly from a high quality metal that makes the gun feel extremely sturdy in the users hands. The slide of the Viking Tactics 1911 features Viking Tactics trade marks on both sides that make the handgun look like a true professional’s gun. Novak grips are featured on this gun and feel great in the users hands as well as providing a extremely stable and non slip surface for the hand.

A threaded barrel gives the user the ability to mount a barrel extension to the gun to give the gun a Spec-Ops style look or to allow the user to install a longer inner barrel. The action of the Viking Tactics 1911 is extremely smooth and crisp, with each shot a extremely menacing sound is heard.

The SOCOM Gear Full Metal 1911 Viking Tactics is a great addition to SOCOM Gear’s line up of licensed and high quality GBB hand guns that surely do not disappoint.

Specifications :
Manufacturer: SOCOM Gear
Muzzle Velocity: 315-330FPS
Magazine Capacity: 15 rounds
Package Includes: gun, magazine, lanyard, manual

Pro Arms 6 Shell Revolving GL

Description:
The Pro Arms 6 Shell Revolving Airsoft Grenade Launcher is constructed mainly out of metal and polymer and features a extremely sturdy and durable construction. With the ability to hold up to 6 M203 grenade shells the Pro Arms Revolving Grenade Launcher is a true CQB beast.

The Pro Arms grenade launcher features a extremely compact design which allows the operator to easily maneuver around corners and lay waste to anything in its path. A pistol and vertical grip allow the operator to comfortably and efficiently grip the launcher despite its weight when loaded with M203 shells.

A Picatinny rail is featured above the cylinder which allows the operator to mount a variety of optics for quick target acquisition. A latch above the pistol grip is used to open the revolving cylinder and allows quick access to reload your 40mm grenade shells. The revolving mechanism of the Pro Arms Revolving Grenade Launcher is operated by rotating the cylinder counter clock wise, one click for each shot.

QD Sling Swivel points are featured above the pistol grip and allow the user to employ a sling in conjunction with the launcher. The Pro Arms 6 Shell Revolving Grenade Launcher is a true game changer on the field and is sure to bring a level of intimidation into your game play.

Manufacturer: Pro Arms
Color: Black
Weight: 10.5 pounds unloaded
Total Length: 16.5"
Caliber: 40mm
Grenade Capacity: 6

Thursday, June 16, 2011

Close to Retirement as a Player

Although not played airsoftgun again, but there is still interest in the military enthusiasm. In particular toy airsoft circulation now starting again crowded.

Where the type of spring airsoft toy now many of entry into Indonesia.
types of toys that come highly variable, ranging from type ever up here until now with the types that are very far into its original shape.

There is one type of toy that really liked the players at the M16A1 airsoft, where the species is very similar to the original or 1:1. This species is very widely used by players to impress in the vietnam war. In those days most of this type ever used.

But about clothing or uniforms that have been rare. Types, published today, although with the same motif but differs from the side seam. Where the stitches are not followed as the original. On average only new BDU-shaped stitches.

Tuesday, June 14, 2011

Bravo 3 Burst Pistol Grip Shotgun Spring

Description:
The Bravo 3 Burst Pistol Grip Shotgun is a replica of the famous Tokyo Marui M3 Shotgun. It is fed by a replica shotgun shell that loads 3 BBs into 3 separate barrels with every action.

The 3 barrel design is the best way to accurately shoot multiple BBs at the same time. Although the gun is made primarily of plastic the structure is very sturdy. This shotgun features a stock less design which helps the user keep the gun very close to their body for maximum mobility. The compact size also enables the user to easily keep this shotgun as a backup to their primary AEG.

Specifications:
Manufacturer: Bravo
Muzzle Velocity: 290-310FPS
Shell Capacity: 30 rounds
Package Includes: Gun, 1 Shell, Sling, Speed Loader.

VFC Full Metal PDW w/ 8" Barrel

Description:
The VFC PDW is a amazing full metal replica of the ever popular PDW style gun and is sure to impress. The VFC PDW is compact in every way possible; first and foremost, a compact 8 inch barrel is featured on the
PDW which allows the user to easily maneuver through tight corners. The upper receiver and rail system of the PDW are one piece which makes it impossible for the rail to wobble or flex.
The rail system allows for complete customization of the AEG with accessories such as flashlights, lasers, vertical grips, or anything else that you will need. The PDW features a side folding skeleton style stock with a QD sling swivel point at the rear and front of the stock.
Since there is no way for the user to store a battery in the stock of this gun, the user must store the battery in a PEQ box on the front of the AEG.
The PDW continues its compact design with its smaller and slimmer pistol grip and lower receiver to keep the AEG light and allow the user to quickly and easily snap from target to target.
To top off the ergonomic features of the PDW, it features an ambidextrous selector switch and magazine release. Of course since this gun is made by VFC, you can expect top notch externals to match its extremely high quality externals. The VFC PDW fires like a well oiled machine and is a true beast at close ranges. The VFC PDW is a perfect CQB gun that will takes its users game play to the next level, take the PDW to your local CQB field and you will not be disappointed.

Specifications :
Manufacturer: VFC
Velocity: 375-400
Weight: 5.2 Pounds
Length: 27.9"
Magazine Capacity: 120 rounds
Package Includes: Gun, Magazine. flash hider, PEQ box

SOCOM Gear MK1 PWS MK112

Description:
The SOCOM Gear MK1 PWS MK112 is a great AEG that is perfect for field play and can also reach out and touch the enemy if need be. This AEG is based upon PWS’s Mk112 rifle that has been used in Iraq and Afghanistan and quickly became a favorite among security personnel, Law enforcement and the civilian market.
The SOCOM Gear MK1 PWS MK112 features a fully licensed receiver with authentic trade marks and is made from a extremely high quality nylon fiber polymer that is sure to stand up to the most rigorous conditions. The Madbull one piece outer barrel is surrounded by a PWS free float MK112 rail system that is also produced with full licensing by Madbull.
The MK112 rail system features 3 QD sling mounting points and enables the user to mount a variety of tactical accessories such as a vertical grip to maintain a firm hold on the AEG or a tactical light for dark conditions.
The front end of the SOCOM Gear PWS MK112 is finished off with the famous PWS FSC Compensator. The battery of the SOCOM Gear PWS MK112 is housed in the crane stock of the gun which allows the user to remove the need for excess wires or battery boxes. The SOCOM Gear MK1 PWS MK112 is a excellent replica of the real steel PWS MK112 and is sure to impress any avid collector or player.

Specifications
Manufacturer: SOCOM Gear
Velocity: 360-370
Weight: 6.7 pounds
Length: 31.4"
Magazine Capacity: 450 Rounds
Package Includes: Gun, Magazine.

Tuesday, May 3, 2011

JGW Full Metal M4 RIS Electric BlowBack

Description:
Javelin Gun Works Full Metal M4 RIS Electric BlowBack Airsoft Gun. The Javelin Works M4-A1 RIS is Javelins version of the M4 RIS that we all know and love. The gun features a full metal body, retractable stock and a full metal rail system.

The rail system featured on the Javelin M4 RIS is slightly fatter then the usual rail interface system, this is because the battery is housed inside of the rail system allowing the use of any stock. The Javelin M4 RIS features a Electronic Blowback system that provides realism as well as a good amount of recoil. The gun uses a 360mm barrel, making a viable gun for any engagement from CQB to mid range engagements.

The body is a high quality full metal body without any creaks or flex and the finish looks great. The retractable stock looks very similar to a LE style stock with a few changes in design and a small rail mounted on the right side of the stock.

The Javelin M4 RIS features a standard front triangle sight and a detachable rear sight that allow for easy co-witnessing. Overall, the Javelin Gun works M4 Ris with Electric Blowback is a great buy that will not disappoint.

Specifications:
Manufacturer: Javelin Gun Works
Muzzle Velocity: 360+ FPS
Magazine Capacity: 300 rounds
Package Includes: gun, magazine, battery, charger

ICS GLM Full Size Revolving Grenade Launcher

Description:
The ICS GLM Full Size Revolving Grenade Launcher is constructed from a high strength polymer and is capable of holding 6 40mm grenade shells. The ICS GLM is constructed out of a high strength polymer to keep weight down while being very durable and shatter resistant.

The ICS GLM features a full rail system on the front of the gun which is perfect for a vertical fore grip, light or even a laser, also featured is a top rail for mounting of a red dot optic. A buffer tube with LE stock is mounted at the back of the launcher which is able to be adjusted to 3 different angles and 6 lengths.

Two QD sling swivel points are located at the base of the buffer tube as well as a included rail mounted QD sling point on the railed hand guard of the launcher. A latch under the back of the hand guard is used to open the revolving cylinder and allows quick access to reload your 40mm grenade shells.

The revolving mechanism of the ICS GLM is operated by rotating the cylinder counter clock wise and tension can be released via a small lever near the front of the cylinder assembly. The ICS GLM is the latest in revolving grenade launchers and definitely stands out from the crowd.

Specifications:
Manufacturer: ICS
Material: High strength polymer
Color: Black
Weight: 4.8 pounds unloaded
Total Length: 28.7"
Caliber: 40mm
Grenade Capacity: 6

Sunday, April 17, 2011

G&G GR15 Raider Carbine GBB

Description:
The G&G GR15 Raider Carbine Electric Blow Back Airsoft Gun is an excellent solution for a high quality, low price, AEG. The body is made from G&G's famous ABS plastic. The barrel, RIS, and gearbox are completely metal. The monolithic rail system is the perfect platform for mounting CQB optics like holosights or red dot sights; it's also very sturdy for mounting vertical grips and flashlights. The pneumatic blowback system adds realism to the gun without sacrificing performance or reliability. The crane stock houses the battery so the user can adjust the length of the stock to their preferences while keeping the battery wires hidden. This is a well engineered and executed AEG from one of the most famous airsoft gun manufacturers.

Specifications:
Manufacturer: G&G
Muzzle Velocity: 315-330 FPS
Magazine Capacity: 450rds
Package Includes: gun, magazine, 1000 round bag of G&G .20g

Thursday, April 7, 2011

H&K G36C Spring & Electric

Description:
The H&K G36C Spring & Electric Powered Canadian Legal Airsoft is a entry level gun. Full plastic construction keeps this gun very light but is not as durable as its high end metal counter part. The H&K G36c is able to function off of electric power or it can be manually cocked with the charging handle. The H&K G36C has realistic features such as the side folding stock, carry handle, railed hand guard, and magazine release. Despite the realistic features, the H&K G36C leaves much to be desired in the authenticity department. .
Although the H&K G36C may be adequate for a wall hanger or display piece, for only 27 dollars more you can purchase a JG MK36 which surpasses the H&K G36C in both quality and durability. While the H&K G36C does have all of the same features as the JG, the build quality of the JG is of much higher quality. The JG features a full metal barrel as well as high quality polymer furniture that surpasses the H&K G36C in detail as well as durability. JG also uses a high quality gearbox which increases rate of fire, feet per second, range, and overall durability over the H&K G36. You can view the JG MK36C here, JG MK36C Airsoft Gun ( Latest Edition )
This gun is a low powered airsoft gun that is extremely affordable and non-upgradeable. Please keep in mind, this gun is not skirmish ready and will be easily out performed by most quality airsoft guns. This gun is non serviceable and does not come with a warranty of any kind. More then likely if you attempt to use a gun on a sanctioned field you will get decimated. This gun makes a great display piece but does not belong on the field.

H&K USP CO2

Description:
The Umarex H&K USP CO2 Pistol is a high quality and fully licensed airsoft gun. The Umarex H&K USP uses a full polymer non blow back frame, making it light and easy to use out of the box. Functioning off of Co2 this gun shoots 350-360 FPS enabling it to be used either indoors or outdoors. Unlike most guns in this price range, the Umarex H&K USP uses a high quality metal inner barrel making this sidearm compact and accurate.

Specifications:
Manufacturer: Umarex
Muzzle Velocity: 360 FPS
Magazine Capacity: 16 rounds
Package Includes: Gun, Magazine, Manual

CA Full Metal CA-25 URX Special Forces

Description:
The CA Full Metal CA-25 URX Special Forces Airsoft Gun is a great replica of the real steel version of this gun which it is based upon. Featuring a 7.62 NATO design, the CA-25 URX incorporates a larger magazine then the standard 5.56 style magazine which provides a much higher capacity. Beautifully etched trade marks on both sides of the lower receiver make the CA-25 one of the best looking replicas to date. The upper receiver is also modified from the standard 5.56 style receiver and appears thicker and more reinforced due to its larger caliber round in real steel form. The CA-25 URX features a full length rail system that is perfect for mounting any accessories you desire such as a bipod, Vertical foregrip, flashlight, laser, or even a red dot sight for getting up close and personal. The 14.5 inch barrel is finished off with a great looking flash hider that can be seen on various real steel guns. The CA-25 URX stores its battery very cleverly in the crane stock which removes the need for excessive items such as a Peq battery box or battery pouch. Internally the CA-25 URX features the same high quality gearbox that Classic Army is famous for. High quality steel gears, gearbox shell, polycarb piston and a high torque motor make the CA-25 skirmish ready right out of the box.

Specifications:
Manufacturer: Classic Army
Magazine capacity: 470 rounds
Muzzle velocity: 420fps
Accuracy: 150 feet
Battery pack size: Crane stock
Package includes: Gun, Manual, 470 Round CA Magazine, rail covers, Cleaning Rod

Wednesday, March 30, 2011

H&K MP7 Gas Blowback Airsoft

Description :
The H&K MP7 Gas Blowback is a high quality, top of the line gun with a fiber reinforced polymer body, functioning cocking handle, and a gas-in-mag design. The real blowback simulates what it is like to shoot a firearm. The adjustable flip-up front metal sight allows for precision shooting. The Retractable shoulder stock and folding grip allow for comfort and customization to the preference of the shooter. The gun shoots at over 900 shots a minute! The adjustable hop-up and metal Picatinny rails complete the design exquisitely. Used extensively in mil-sim events.

  • Real Blowback simulates firearm
  • Fiber reinforced polymer body
  • Functioning cocking handle
  • Gas-in-Mag design
  • Adjustable flip-up front metal sight
  • Metal Picatinny rails
  • Retractable shoulder stock
  • Folding front grip
  • 900 shots a minute!
  • Authentic replica
  • Adjustable Hop-up

Specification :



Caliber    6 mm
Action    Semi/Full
Power    Gas
Capacity    40-shot
Barrel Length    8.6
Brand    Heckler & Koch
Safety Type    Manual
Front Sight Type    Adjustible flip-up metal
Barrel Finish    Metal
Ammo Type    Airsoft BBs
Total Length in Inches    23.5
Velocity- FPS    37




Monday, March 28, 2011

KWA America

KWA is one of the OEM manufacture for KSC. KSC and KWA are two separate, independently operated companies.

While KWA manufactures for KSC and shares the same design, some of the products sold under the KWA brand may be configured differently to suit different worldwide markets. However, all products manufactured by KWA, regardless of brand, are produced with the same high standards and quality controls that KWA and KSC are known for.

Not all KSC products are manufactured by KWA. KWA only markets/sells products it manufacture.

KWA products are engineered in Japan and made exclusively at KWA's state of the art manufacturing facility located in Taiwan.

KWA USA cannot provide warranty service for other brands or makes. Interchangeability / compatibility of parts between KSC and KWA products are not supported because of different manufacture specifications.

KWA product specifications are different based on the demands and regulations of each different market (Japan, U.S., RoW). Check with your local reseller or contact KWA USA for exact specifications on the product you are interested in.

KWA USA cannot provide warranty service for KWA products purchased overseas or from non-authorized resellers. Please contact the original place of purchase for all warranty services.

UK Arms MK36 Rifle Spring

Description:
The UK Arms MK36 Rifle Spring Airsoft Gun is constructed from plastic that keeps the weight down but is not as durable as its high end metal counter part. The UK Arms Mk36 is operated by pulling the charging handle which cocks the spring for a single shot. The spring system used in this gun allows it to be very affordable, however it is not skirmishable. The UK Arms Mk36 has realistic features such as the side folding stock, carry handle, folding bipod, and magazine release. Despite the realistic features, the UK Arms MK36 leaves much to be desired in the authenticity department.

This gun is a low powered spring airsoft gun that is extremely affordable and non-upgradeable. Please keep in mind, this gun is not skirmish ready and will be easily out performed by most quality airsoft guns. This gun is non serviceable and does not come with a warranty of any kind. More then likely if you attempt to use a gun on a sanctioned field you will get decimated. This gun makes a great display piece but do not belong on the field. For 105$ more you could purchase a high quality, skirmish ready AEG such as the JG MK36C which you can see here, JG MK36C Airsoft Gun ( Latest Edition )

As previously stated, this gun is not field ready due to its low performance. Although due to its realistic look and features, this gun is a great choice for use in film productions or as a great display piece. Please do not expect to be able to compete with high quality airsoft guns while using this low cost airsoft gun.

Specifications
Manufacturer: UK Arms
Weight: 2 pounds
Muzzle Velocity: 240-260 FPS
Package Includes: gun, Safety glasses, sling, flashlight, laser, low quality BBs

UK Arms M14 Spring Rifle

Description:
The UK Arms M14 Spring Rifle Airsoft Gun is a low powered electric gun that is constructed completely out of plastic. The UK Arms M14 features a shorter outer barrel to replicate the Socom style M14 as well as a polymer rail system for mounting accessories such as the included red dot and flashlight. Realistic features such as a rear iron sight, detachable magazine, flash hider and safety make this gun a great prop for film or reenactments. Although the UK Arms M14 Spring Rifle is the cheapest replica of the M14 market, it is easily outmatched by much higher quality guns such as the CYMA M14.


Although the UK Arms M14 Spring Rifle may be adequate for a display piece or prop, there are much better options for skirmishable airsoft guns that are still affordable. One of the best high quality entry level AEGs is the CM028 AK47 Airsoft Gun which comes in at only 109.95$ and is constructed out of high quality polymer and features a very durable and well performing gearbox. If you are interested in purchasing a M14 styled AEG such as the UK Arms that is still affordable for most budgets then look no further then the CM032 M14 Airsoft Gun (Black). Coming in at only $145 the Cyma M14 is constructed out of high quality metal and polymer for maximum durability as well as a high quality gearbox that performs better then the UK Arms by leaps and bounds

As previously stated, this gun is not field ready due to its low performance. Although due to its realistic look and features, this gun is a great choice for use in film productions or as a great display piece. Please do not expect to be able to compete with high quality airsoft guns while using this low cost airsoft gun.

Specifications:
Manufacturer: UK Arms
Muzzle Velocity: 200-275 FPS
Package Includes: gun, magazine, Safety glasses, sling, low quality BBs, optic, flashlight, plastic rail system, speedloader

ECHO 1 Full Metal ASC-H

Description:
The long awaited ECHO 1 Full Metal ASC-H Airsoft Gun has landed, and it is truly a work of art! Featuring a full metal and polymer construction, the Echo 1 ASC-H mirrors the real steel version in nearly every way. The upper receiver of the ASC-H is constructed out of high quality metal and features a very realistic bolt with functioning bolt catch. A CQB style outer barrel as well as a foldable and retracting stock makes the ASC-H a very compact and ergonomic rifle that is great for field or close quarters. The Echo 1 ASC-H is also fully ambidextrous featuring a magazine release and fire selector on both sides of the gun.

A completely monolithic top rail system allows for unlimited optic possibilities, three rails are also featured on the front of the gun for mounting of lights, lasers or vertical grips. Internally the Echo 1 ASC-H is unmatched in terms of performance and reliability in its price range. A high quality metal gearbox is used along with perfectly shimmed gears and a piston that can easily handle anything you can throw at it. The gearbox of the Echo 1 ASC-H sounds amazing and produces a very high rate of fire as well as easily hitting 150+ feet consistently. The Echo 1 ASC-H Airsoft Gun is truly a power house that is sure to be extremely popular with both veteran and novice airsofters alike.



Specifications:
Manufacturer: Echo 1
Gearbox: Ver. 2
Accuracy: 150 feet
Muzzle Velocity: TBA
Magazine Capacity: 400 rounds
Package Includes: TBA

Thursday, March 24, 2011

Socom Gear PWS MK112 12inch AEG


SOCOM Gear Full Metal MK112 (PWS) 12" AEG

Fully licensed by Primary Weapon Systems (PWS)
T6 High Quality Aluminum / High Density Nylon Construction

Features:
Madbull PWS Mk.112 free float rail system (For attach any vertical grips, lasers, lights, grenade launchers, etc.)
Madbull PWS DNTC FSC 556 Compensator
One piece Madbull outer barrel
5 Position Cane Stock With Rubber Pad
Sling mount pre-installed on stock base
Advanced hardened polymer receiver (much more durable than standard plastics)
Fully licensed receiver authentic PWS markings
Total of 3 quick-detach sling mounts on the rail
Enhanced pistol grip with upgraded motor base
Shoots approx. 370fps with .20g bbs

The battery and wires are cleverly hidden in the adjustable crane stock
The charging handle, bolt catch/release, function just like the real thing
Magazine accommodate 450 Rounds 6mm plastic BBs
Recommend to use 1400mAh-9.6V battery (Package NOT include battery)
Opening the bolt cover to adjust HOP UP

T6 High Quality Aluminum / High Density Nylon Construction
Fully licensed by Primary Weapon Systems (PWS)
Madbull PWS Mk.112 Rail Handguard, PWS DNTC FSC 556 Compensator, PWS Polymer Receiver

Wednesday, March 23, 2011

KWA USP Compact Metal Gas Blowback NS2


KWA USP Compact Metal Gas Blowback Pistol NS2
Specifications:
- Velocity: 300 FPS (0.2 g BB) / Range 70-90 feet
- Barrel Length: 4 inches / 9 cm
- Magazine Capacity: 20 Rounds
Features:
- Full Metal Slide
- New NS2 Gas System
- Working Decocker
- Made in Taiwan

The KWA USP Compact is like all of KWAs other gas pistols: Built solid with super smooth action. This pistol functions just like the real thing! It breaks down clean and easy and features a double single action trigger with a decocking safety switch. It also has a recessed hammer to keep it out of the way when the gun is in a holster or concealed.

When opening the box for the USP, you will first notice the whole front quarter inch of the metal slide is painted blaze orange to comply with federal laws. Also the metal slide has no trademarks to speak of, nothing. Just a black sticker that reads "Made in Taiwan." Again all of this complies with U.S. laws for importation, trademark infringement and laws about replica guns, but local laws might vary or be more restrictive so check with the proper authorities first, but they should be okay with this one. For those that want the trades on their gun you can buy full trademarked metal slides as an aftermarket add-on now.

Comparing the KWA USP to the real steel, all the external parts that are metal on the real gun are metal on the KWA version. The airsoft pistol comes set-up primarily as a right-handed shooters' gun. However the controls such as the safety/de-cocker and slide release function very smoothly and are easily operable with just the left-hand after some practice. The magazine release is ambidextrous and located at the rear of the trigger guard. On top of the slide is a set of very nice and visible three-dot sights. For those interested in using "glow-paint" for low-light shooting or fast target acquisition these sights will work well and not need to be replaced.

Sig Sauer Licensed P226-S CO2

SoftAir Sig Sauer Licensed P226-S CO2 Airsoft Gas Blowback Pistol (X-Five Open Custom)

The Sig Sauer Licensed P226-S packs power, a light trigger pull, accuracy, and reliability into a great priced GBB Pistol. The P226-S features a Full Metal Extended Slide Compensator, Full Metal railed frame, fully reinforced internal parts, and reinforced external parts. Besides performance, the look and feel of this gun are top notch making this pistol one of the best gas pistols you can buy for Airsoft whether you are using it for Target Shooting, Training, or Milsim.

Muzzle Velocity: 340~370 FPS (Measured with 0.20g BB's)
Dimensions: 285mm L x 155mm H
Magazine: 24+1 rounds. CO2 Magazine Included.
Power: CO2. Can use Green Gas and Propane with proper magazine and adapter
Package Includes: Gun, Magazine, Scope Mount Base, and Manual

Manufacturer: SoftAir (Licensed by SIG Sauer through Cybergun)

Features:
- Full Metal Slide, Compensator and Lower Railed Frame
- Full Metal Scope Mount Base included!
- Accessory Ready Railed Lower Frame for Laser and Pistol Combat Illumination / Light
- 100% Fully reinforced internals. This pistol can handle green gas, red gas and CO2.
- 100% factory support. We deal directly with the manufacturer to bring you the best parts support in the industry of Airsoft
- Reinforcement parts: Full metal outer barrel, chamber, reinforced recoil spring, spring guide, slide stop, safety hammer, hammer spring, trigger, slide, firing pin, valve assembly and lower frame
- Slide cocking serrations for enhanced tactical advantage
- Ambidextrous on frame safety
- Enhanced Shooter Iron Sight

Monday, March 21, 2011

Thompson M1A1

Thompson M1A1 is one of those coveted and in some respect prestigious infantry small arms of World War II. For the GIs the Thompson M1A1 marked special status as not everyone was issued with one. In WWII militaries typically only NCOs carried submachine guns and Thompson's weapon had already gathered fame during the 1920s unrest in United States.

The M1A1 was military version of Thompson's original privately funded M1928 gun. In M1A1 the firing pin and hammer were removed and replaced with machining replacement firing pin to the face of bolt. The M1A1 production commenced at the end of 1942 and more than 1.3 million were made.

This Firepower replica version is extremely well made with full metal receiver and outer barrel. The wooden parts are carefully created from plastics and will fool anyone from a distance to believe its real wood.

The performance of the gun is very good with 750-850rds per minute rate of fire and effective range up to 50 meters.

Technical specifications:
Lenght: 32"
Weight: 7 lbs
Ammunition capacity: 47 / 300
Muzzle velocity: 340 FPS with 0.20g BB
Gears: Metal
Battery: 8.4v large-type
2-way adjustable rear sight for windage and elevation

Speed loader, battery and charger included
Works best with 0.20g BBs or heavier

JP : FAMAS - Clear

Description:
The FAMAS may look like a space age weapon but it's actually been around for a long time, and is a favorite amongst it's users. This is the only officially licensed FAMAS available. The FAMAS features the bullpup design which gives it a compact length with precision accuracy. The iron sights are adjustable for many different lighting apertures. There is a built in bipod and carry handle. Also, on the bottom of the hand guard there is a weaver rail segment for a vertical grip and/or flashlight. The FAMAS is a unique multipurpose AEG that's perfect for all types of play.

Specifications:
Manufacturer: JP
Muzzle Velocity: 300FPS
Magazine Capacity: 300 rounds
Package Includes: Gun, magazine, battery, charger, cleaning rod

Monday, March 14, 2011

Heckler & Koch / H&K MP5 Navy Dual Power Fully Auto / Full Size Airsoft AEG

A California legal Heckler & Koch Fully Automatic MP5 with authentic logos.
This is not your ordinary MP5, for many H&K fans & collectors, this means much more because it is a Heckler & Koch manufactured MP5!
This is the latest version of the classic sub-machine gun, featuring a sliding stock and a dual power system. The system, which gives the shooter a choice between electrical and spring-powered operation, is an airsoft innovation that ensures a game can always be continued.
The H&K MP5 Navy Dual Power features a 46-shot drop out magazine, collapsible stock, adjustable rear sight, and the ability to shoot in either semi- or full-auto at 250 fps. Dual power means it can operate with or without batteries.

This is an affordable entry level AEG for Heckler & Koch collectors and recreational gamers that is looking for something not over 300 FPS.
For those looking for high power AEG that is customisable, please look into our Marui compatible / Metal gearbox AEG. All warranty provided by UMAREX USA with warranty card.

Firing Modes: Fully Automatic, Semi automatic and safety
Power: Battery powered or spring powered.
Magazine Capacity: 46 rounds. This rifle uses Umarex H&K Dual power MP5 magazines only. Not Marui type.
Manufacture: Heckler & Koch. OEM by Umarex USA.
Safety Type: Manual
Battery: 6 x AA. Standard or rechargeable. Not included.
BB: 6mm Airsoft bb
Length: 18.5 inches
Muzzle Velocity: 250 FPS
Hopup: Built in. Adjustable
Trigger response time AEG mode: 0.2~0.4 Sec.
Trigger response time cocking mode: 0
Available Color: Black and Dark Earth

Features:
- Adjustable rear sight.
- Metal smooth type inner barrel
- Adjustable Hopup for enhanced range.
- Telescopic retractable stock.
- 1:1 scale full size.
- Fully licensed H&K Product.
- California Legal full auto Heckler & Koch MP5!

Mauser Licensed Airsoft Shadow Op. Bolt Action Spring

Mauser Licensed Airsoft Shadow Op. Bolt Action Spring Powered Sniper Rifle with Bipod and 3-9x40 Scope
This is the popular Shadow OP Sniper rifle that is a clone of the Maruzen Type96 with licensing by Mauser / Cybergun. Unlike the other re-brands in the market, this rifle is equipped with the scope and bipod out of the box. This rifle uses all APS2 / Type96 magazines and upgrade internal parts from Maruzen and WELL sniper rifle series.

Length: 1140mm x 170mm / ~10 lbs
Weight: 3950g
Firing Mode: Single Shot Bolt Action
Materials: Metal Alloy, High Impact Polymer
Muzzle Velocity: 430~500 FPS
Magazine: 23~30rds

Package Includes: Gun, Bipod, 3-9x40 Scope, Scope Rings, Rail Attachment point, Sling, Speedloader, Manual
Manufacturer: Mauser license from Cybergun.
Hopup: Adjustable
Max Range: ~200 feet
BB's: Recommended 0.20g or heavier Matrix & compatible high grade Airsoft BB's only.

Features:
* High Impact Polymer Stock for high durability
* Full Metal Barrel, Bolt Assembly, and Trigger Assembly
* Metal Bipod and 3-9x40 Scope included!
* High Range and Muzzle Velocity right out of the box
* Fully Licensed Mauser Trademarks
* One Piece Precision Metal Barrel
* Adjustable Hop-up System
* High Power Pin-Point Accuracy Performance
* Effective Long Range Shooting
* Complete Picatinny Mounting Rail Systems
* Scope Ready / Bipod Read.
* Ultimate Bolt Action Airsoft Spring Rifle
* Spare Magazine Available
* Spring Powered Deluxe Speed Loader
* On Frame Safety. Tactical Sniper Rifle Sling
* Lots of available after market parts and upgrade accessories.

Review:
This is one of the most popular Airsoft Sniper Rifle of the year! Already equipped with a sniper real steel scope and bipod. Great accuracy, range, performance, reliability, and easy on your wallet! A Maruzen Type96 will cost $400 + $300 to upgrade to 500+ FPS = $700. This sniper rifle shoots an average 450~500 FPS right of the box with great accuracy for only 25% of the price. 1:1 Scale and heavy weight with lots of detail and standard mounting to fit your favourite sniper gears. Due to it's popularity, lots of after market upgrade kits are made for it.

Umarex Walther Licensed PPK Full Size Airsoft Gas Blowback Pistol by Maruzen Umarex Walther Licensed PPK Full Size Airsoft Gas Blowback Pistol by Maruzen

LOOK FOR the Unique Lines and Distinctive Shape of the PPK replica as a TRADEMARK of Walther.
Walther gas powered airsoft pistols use Green Gas to propel airsoft BBs down range. Walther offers gas guns with blowback action (recoil). The realistic recoil is created cycling the slide rearward when the gas gun fires. A great series of airsoft guns for those who like safely administered simulation events.
Fan of Walther products and the famous PPK used by James bond? This pistol is here to perform on top of it's collector's value. This pistol is manufactured by the real fire-arm company Walther known to manufactures the real PPK and P99 hand guns. OEM for the hand gun is Maruzen, an reputable Japanese Airsoft manufacture and licensed by Umarex USA. Features includes compact size, realistic blowback action, on frame safety, detachable magazine and realistic markings.

Features:
Blowback slide delivers realistic action
Hop-Up for longer distance & increased accuracy
Metal smooth bore barrel
Double- or single-action trigger
Open sights (fixed)
22-round drop-free mag also holds green gas

Specification:
Caliber : 6 mm
Action : Double / Single
Power : Green Gas
Capacity : 2
Brand : Walther
Safety Type : Manual
Rear Sight Type : Fixed Notch
Front Sight Type : Fixed Blade
Barrel Type : Smooth
Trigger Type : Double / Single
Ammo Type : .20Airsoft BB
Total Length in Inches : 6
Velocity- FPS : 280

Wednesday, March 9, 2011

ICS Full Metal L86 A2

Description:
The ICS L-86A2 is highly effective support weapon. ICS has always implemented an innovative design in their guns and this L86 is an excellent example of that innovation. All it takes is the removal of two body pins and the butt plate to expose the gearbox. Then remove the motor connectors and the gearbox slides right out of the upper receiver. The best part of all is the simple removal of the spring guide, just push one pin and the spring guide is released out of the back of the gearbox, making a spring swap a 20 second job. ICS has really worked hard to provide a great quality L86 and they surely have done it. The exterior is made of high quality metal and plastic where needed. The internals come complete with a ball bearing spring guide and metal bushings. This gun has it all, the looks, the power, and the ease of use. Be one of the first to own this revolutionary AEG, place your order now!
Specifications:
Manufacturer: ICS
Muzzle Velocity: 375 FPS
Magazine Capacity: 450 rounds
Package Includes: gun, 9.6 nunchuck battery, charger, 2 high capacity magazines, manual, cleaning rod
Features:
Full Metal Construction
Full Metal Gearbox
Large Battery Capacity
Easy Disassembly
Easy-to-change Spring
2 High Cap Mags

Monday, March 7, 2011

Marushin MP40 GBB Matt Black

From the famous airsoft gun manufacturer Marushin now comes the 8mm blowback MP-40! Featuring recoiling bolt that can be locked in position like in real MP-40, folding stock, double-feed standard MP40 magazine that houses internal gas tank, accurate stamps, die-cast metal parts and great realistic details all across the gun.

Made in Japan
Operation principle: Gas operated airsoft blowback, full automatic
Ammunition: 8mm plastic BB
Lenght: 625mm (stock unextended)/835mm (stock extended)
Weight: 2900g
Power sources: HFC134a gas
Ammunition capacity: 32 BB

Thursday, February 24, 2011

Tanio Koba GM-7 MEU


The Tanio Koba GM-7 has become very popular for its high quality blowback system. This new addition to the GM-7 model lineup is the MEU Model. The GM-7 MEU is a long-awaited addition to the lineup.

Next year marks the 100 year anniversary of the M1911 pistol, but Tanio Koba uses the more modern Springfield frame. So you can feel first hand today’s combat government in this model.

Features include a kings type ambi-safety that is placed precisely where your fingers naturally reach, and a telescopic type recoil spring guide. Improvements to the shock absorber system has led to its function being much better than before.

New checker plug design is also a modified feature of the GM-7 MEU. In the barrel you can see a “NOWLIN” engravement. Another feature is a lanyard ring has been situated under the straight housing. The magazine is a stainless steel 8-round clip.

In Japan, a model gun of the same type and model was featured in the movie “Outrage” directed by Takeshi Kitano. Makes the GM-7 MEU a must-have for fans of the movie and director.

The Koba GM-7-MEU is a limited production model, with only 200 units will be produced.








Technical Specifications
Tanio Koba GM-7 MEU Spec
Operating Principle: Cap-firing model gun
Length: 222mm
Weight: 564g
Barrel Length: 45ACP
Function: KOBA- (Pat,P) Extended Open Detonator System
Materials: Heavy weight materials
Rounds: 8
Limited production: only 200 made
Made in Japan

Tanio Koba M4 CP Blowback


This is the new Tanio Koba M4 CP Blowback Model of 2011 that has been designed and manufactured as entirely new model. Because of the extensive development and manufacturing involved, the model price is higher.

Special Barrel Design
The short type barrel design allows generous ejection of firing smoke, which is unusual for model guns of M4’s lenght.
Because of the Japanese regulation regarding model guns carbide has been inserted inside of the barrel.

Reliable Center Fire Firing Action
The ABS M16 model gun developed during the MGC-era was capable of firing the cartridges by the bolt-face moving forwards (you can find this model in our store as second hand model).
Back then this was the most suitable way to fire, but in the other hand it doesn’t make much difference with side-firing types. For this model, the “center fire” type of model gun firing action has been adopted, which makes the model firing action more reliable.

Also by cutting a part of the bolt and exposing the firing-pin, this helps to ensure safety of the model. The ejector for the real guns is “plunger type”, but for this model the ejector is attached inside of the upper receiver. This ejector’s sheet metal is connected to the upper receiver and is able to absorb the shock of the cartridge by the entire receiver.
The end-result is reliable firing action, even in full automatic.

OTHER FEATURES

Short Barrel & Muzzle Design
There is an A2-type muzzle flash suppressor attached in front of the front site base. Because of the short barrel the firing smoke can dissipate through muzzle unlike in longer model gun rifles.

Rear sight
The rear sight can be detached. It is fully adjustable. The charging handle can be operated as in real M4.

Rear Swivel
The rear swivel ring is located in the base of the stock and can be switched to left and right.

Stock
The stock is capable to be adjusted into 5 steps.

Trigger Guard
Knights type trigger guard is adopted which gives you enough space to trigger even with gloves on.

Markings
The mark on the right side of the receiver also indicates that this is a military law enforcement model.

Bolt & Ejection Design
The bolt facing is reproduced clearly to the locking-lag.
The firing pin is located in the internal area of the bolt. The cut parts of both sides are also slot passages for ejectors.
The sheet metal ejector is connected to inside of the upper receiver.

Magazine Design
The magazines are copies of P-MAG. Don’t run it over by a car since it is not a MAGPUL version.

Plug Fire Cartridge Design
A newly produced hexagon cartridge. If you see the head of the F-pin you will feel what it means. The loader is designed to set the inner and F-pins with one stick.

Firing Action
The Koba/M4-MG fires in a fast cycle with a very stable blowback. The gun fires 30 rounds rapidly and the bolt stops with any problems. It is a perfect model to shoot and play with.

The cartridges are aluminum made and brass colored almite finished. Compared to real brass it is light and the cartridge ejection action during blow-back is remarkably good.This cartridge contains a secret which has a hexagonal cut in the edge of the F-pin.

Therefore when the blow-back starts, the gas escapes around the hexagonal cut and more gas escapes to the muzzle compared to the round shaped cartridges, but don’t worry, the pressure of the gas will squeeze the O-ring, so gas will be sealed properly. In the top of the F-pin there is also a hole and the front head of the detonator will fit in. This part is secured so the F-pin will hit the cap in the center which prevents miss-firing.

The advantages for the new-type cartridges can be numbered more. It’s faster since it is lighter, flies further and if the cartridge falls on the ground you can hear the light metal sound.

Recoil Power
Unexpectedly, there are reports of significant recoil with this new Tanio Koba M4 model thanks to the new advanced cartridge design and well-refined firing mechanism.

TECHNICAL DETAILS
Type: Cap Firing Blowback Model Gun
Overall length: 685mm~765mm
Main material: Amorphous nylon, Zinc alloy
Overall weight: 2,300g
Magazine capacity: 30 rounds

Wednesday, February 23, 2011

Tokyo Marui L96 AWS Sniper Rifle



British firm Accuracy International is the proud manufacturer of L96 Sniper Rifles and its variants. This rifle was initially designated as PM (Precision Marksman) when it was entered into competition in the 1980’s when the British Army was on a hunt for a replacement rifle for their ageing Lee-Enfield derived sniper rifles such as the L42A1.

When the Swedish Military was also seeking a new sniper rifle, Accuracy International entered an upgraded version with AW designation which stands for Arctic Warfare. This version has a special de-icing feature on the barrel making it effective on extreme cold temperatures as low as -40 degrees Celcius. This feature has been adopted in the entire AW range of rifles even if it is not for use on frigid regions. This rifle has been popular among police, civilian and military services all over the world. The British Army decided to adopt this rifle and designated it as L118A1. It is currently being used in Afghanistan and Iraq by the British Army and other coalition forces.

AIRSOFT REPLICA

This review sample was handed-over to me by a fellow operator for review purposes. This did not arrive through a courier unlike those that I would receive direct from the manufacturer such as ICS. As such, the rifle did not come with a Japanese Manual and the strap that secures the rifle to the packaging is missing. The outer part of the box is also a bit tattered.


Nevertheless, the gun is intact and no visible sign of usage or abuse. Just like most sniper rifles on the market, the first thing that will catch your eye is the overall length of the gun as evident on its packaging. Upon opening it, you will find the external manufacturing quality that TM is renowned the world over. Tokyo Marui has endeavoured to replicate the real steel version down to its minute details.
While its real steel sibling would weigh in at around 6.5 kilograms, it is most comfortable to lug around half such weight on a skirmish field for an airsoft variant. After all, we won’t be shooting at targets well beyond 40 Metres on most situations.

THE EXTERNALS

The upper part of the rifle that consists of the receiver and the barrel is made of metal. The external barrel is large at 30 mm diameter. Why? because this model is a suppressed type. The entire length of the barrel acts like a silencer on its real steel version. As with most short and long weapons, your front sight is already useless once you attach a silencer. Hence, an integrated front and rear iron sights are omitted in the design. A 20 mm rail is attached to the receiver for the use of optics which you will definitely need for this rifle. A non-working metal bolt catch is located on the left part of the receiver whilst the bolt handle is also made of metal.


A large metal ball is used at the end of the lever to ensure optimum grip while cocking with the least effort. Bolt travel is smooth and crisp while cocking as well as on its return. The large safety lever ensures that your thumb would easily grasp it even when wearing a thick glove. When the safety is engaged before it has been cocked, the cocking handle could not be moved to its charging position. It just stays there. When it is engaged after it has been cocked, the trigger could not be pulled. Push the safety lever forward to fire and rearwards for safety.


The engraved markings that you will find on the rifle are “99 AW 5103” at the right side of the receiver, “WARNING REFER TO INSTRUCTIONS MANUAL AW 5103” at the left side of the receiver and “MADE IN JAPAN TOKYO MARUI CO. LTD. ASGK” which is located at the left lower end part of the receiver. An initial “A1” is also embossed on the rubber butt plate.




The lower rifle furniture which is made up of one piece hand guard, trigger guard, grip and stock is plastic made. This is matt in texture and is finished in olive drab colour. This is not painted but rather the true colour of the plastic. The quality of the plastic finish seems to be flawless until you come across the lower part of the handgrip as shown on the photo. There is a very obvious moulding imperfection as evident on the picture. This is not an isolated incident for other reviews of this rifle highlighted as well this part. This is not common to a Tokyo Marui product. Nevertheless, most snipers would paint their rifles to their liking so this is not a major issue. Actually, this is just a very minor issue.


Beneath the front guard lies the rotary hop-up adjustment. This type of hop-up is very easy to use. Right after the hop-up to the rear of the rifle is the magazine well. Tokyo Marui went into great lengths in designing the location of this to exactly replicate the real L96. A new BB feeding and hop-up mechanism has been designed for this matter. This is unique to this rifle and is currently the only one in the market for this type of rifle. The provided 40-round metal magazine will feed from the front not from its top and a plastic follower attached directly to the loading nozzle will extract a BB every time the bolt is cocked and on its return travel. This BB will travel through a ramp and into the hop chamber. There are no dropping BB’s when you detach a loaded magazine from the rifle.




When using a bipod, you can adjust the hop-up without taking your eye from the scope or your firing finger from the trigger.  The trigger guard is integrated into the one piece plastic body. There is sufficient space for glove wearers to play with their firing finger on the space provided. The visible metal parts that are attached to it are the ambidextrous front and rear sling mounts, magazine release lever, bolt catch and the bi-pod attachment.


CONCLUSION
Tokyo Marui have made the lives of current TM VSR owners miserable. I know that this rifle is better and has a more macho look than the VSR but they can’t have both or the wives will declare war. I like this rifle despite the flaws that I have encountered. But obviously, the internals should be upgraded especially the spring and a tighter inner barrel. Even with the BB swaying to the right due to the misaligned barrel, it still managed to maintain a long level flight after proper hop-up adjustment. The misalignment of the barrel could only be an isolated case and does not reflect the entire production of this rifle.
For those among us airsofters who love the motto “one shot, one kill”, this is your rifle. It won’t break the bank unlike those .50 calibre rifles that seems to be an over kill on most gaming sites. Nevertheless, this is a superb airsoft replica from a current hard-hitting and reliable AI L96 which is currently being used by our guys in the warzones of Afghanistan and Iraq. Tokyo Marui should be commended for replicating down to the minute detail as possible the real L96.
I had my China L96 stolen a couple of years back but this time I will have a TM L96 and no one is going to take it away from me!
SPECIFICATIONS
DESIGNATION: L96 AWS (ARCTIC WARFARE SUPPRESSED) OD (OLIVE DRAB)
TYPE: SINGLE-SHOT BOLT ACTION SNIPER RIFLE
CALIBRE: 6 MM
LENGTH: 1115 MM
WEIGHT: 3280 GMS
INNER BARREL DIAMETRE: 6.05 MM
INNER BARREL LENGTH: 500 MM
OUTER BARREL DIAMETRE: 30 MM
OUTER BARREL LENGTH: 609 MM
MAGAZINE CAPACITY: 40 ROUNDS
PACKAGE CONTENTS: SNIPER RIFLE, MAGAZINE, MANUAL, PACKET OF BBs AND 3 SIZES ALLEN WRENCH

Magpul Full Metal MOE Carbine



Description:
The Magpul Full Metal MOE Carbine Airsoft Gun is a high quality AEG that comes completely upgraded with all the high quality Magpul accessories you can think of. The Magpul MOE Carbine uses a Magpul MOE stock, pistol grip, and hand guard, which feature many improvements over the standard furniture of the M4 including ergonomics, build quality, and overall looks.

The receiver of this gun is also a Magpul product; it features Magpul trades as well as a color filled fire selector which really makes the gun pop. A rear MBUS is a perfect compliment to the front triangle sight and finishes off the list of Magpul accessories. Internally the Magpul MOE Carbine features a G&P complete gearbox that offers up a amazing rate of fire right out of the box and performs amazingly well.

Also featured is a one piece metal hop up which supplies amazing accuracy and range. The Magpul Full Metal MOE Carbine is sure to impress any Magpul fan or convert any Magpul ‘non believers’.

Specifications:
Manufacturer: Magpul
Muzzle Velocity: 350-360
Magazine Capacity: 120 rounds
Package Includes: gun, magazine

Adsense